MFC-2360 256x 360 Pixel Capacitive Fingerprint Module

MFC-2360 

256*360 Pixel Capacitive Fingerprint Sensor

Features

  • Spatial resolution 508 DPI
  • 2D sensor array of 256×360 pixels
  • Active sensing area 128 mm x 180 mm
  • Build-in 8-bit ADC for digitizing image
  • Built-in programmable voltage reference
  • High-speed SPI interface
  • 1sec read out time
  • 32-byte on-chip data FIFO


Share
Description

MFC-2360

256x 360 Pixel Capacitive Fingerprint Module

 

Description

The MFC-2360 fingerprint image sensor module is based on capacitive-contact technology with hardened surface and enhanced ESD resistivity. The built-in analog and digital circuitry minimizes the number of external components, and provides easy-to-use with standard SPI interface to microprocessors. Due to its higher sensing area (256X360 pixels), the MFC-2360 can catch more fingerprint characteristics. The operation of MFC-2360 is controlled through registers, following a simple protocol. The captured image quality can be adjusted by setting gain, offset or reference voltage parameters. The internal operation and interface speed can also be configured to the needs.

Specifictions

Parameter Unit Min Type Max Conditions
Dimensions (W x L ) mm 12.8 X18.0 W: Width
L: Length
Pixels (X,Y) dot 256 x 360
Sensor pixel size um 50 x 50
Spatial resolution DPI 508
ADC Pixel resolution bits 8 Max 256 gray

Scales

Chip data FIFO byte 160
Interface SPI
SPI clock M Hz 1 16 32
System clock (ADC) M Hz 6
Supply Voltage V 2.7 3.3
Supply Current mA 9
Operation temperature

 

range

°C -20 70
Storage temperature range °C -40 100
Extended humidity range %RH 20 85
ESD KV 15 (human body mode)
Dimensions (W x L x H)

(Package size)

mm 33 x 20 x 1.7  
Function Yes / No Conditions
Low-power finger detect

mode

yes  
Set Calibration data yes (OTP)
I/O and Core Power

Isolation

yes  
Reset (from MCU to chip) yes  
Interrupt

(from chip to MCU)

yes  

Applications

  • Mobile, Desktop and Network Access Security
  • Physical Access Control Systems
  • Fingerprint Identification Systems
  • Time and Attendance
  • POS Terminals and Kiosks
  • Boarder Control

MFC-2360 Evaluation Kit

       Front view                                Back view

USB Connector PIN Description: Pin Description

Name No States Description
VCC 1 Power VCC (DC+5V)
USB_A 2 I/O/Z USBD-
USB_B 3 I/O/Z USBD+
GND 4 Power Ground
SHIELD 5 Power Shield

MFC-2360 Evaluation Kit (NU) Specification

Sensor 256 x 360 fingerprint sensor
Scanning Speed 1/4 second via USB
Image Resolution 508 dpi (H), 508 dpi (V)
Gray Level 8 bits/pixel, max 256 gray scales
EK (PCB)Dimension Version D: 37mm(L) x 24mm(W) Version E: 52mm(L) x 20mm(W)
Scanner Interface Cable Standard USB compliant cable
Power Supply 30mA, for EK PCB (From USB port)

Suspend Mode: < 500 uA

Demo Requirement XP/Win 7, 8, 8.1, 10, Android, USB 2.0
SOC Spec. NUC12X    or ST Cortex-M4

 

Ordering Information
MFC-2360  256×360 pixel Fingerprint Sensor
MFC-2360M  256×360 pixel Fingerprint Sensor Module

All product specifications are subject to change without prior notice.