MFC-2160 160*160* pixel capacitive fingerprint sensor

MFC-2160

160*160 Capacitive Fingerprint Sensor with IP67

Features

  • Spatial resolution 508 DPI
  • 2D sensor array of 160×160 pixels
  • Sensing area 8 mm x 8 mm
  • SIP package size:2mm x 12.2mm x 0.45mm
  • Built-in 8-bit ADC for digitizing image
  • Built-in programmable voltage reference
  • High-speed SPI interface
  • 08 sec readout time(TBD)
  • Support 160-byte on-chip data FIFO
  • 65Volt ~ 3.6Volt for I/O communication
  • Advanced SiP package to reduce size and provide better water and dust protection
  • Windowing function to crop the smaller image
  • Finger detection function to detect the finger on the sensor
  • Interrupt pin to wake up host when the finger on the sensor at standby mode
  • 1mA power consumption at standby mode
  • 1uA power consumption at power down mode


Share
Description

Overview

The MFC-2160 fingerprint sensor is based on capacitive-touched technology with a hardened surface and enhanced ESD strength. The built-in analog and digital circuits could minimize the number of external components, and provide easy-to-use standard SPI interface to microprocessors.

The operation of the MFC-2160 capacitive fingerprint sensor is as following, a fingerprint image captured by the pixel array, delivering fingerprint ridge or valley signals to A/D converter and digital processor, then to the serial peripheral interface for data-reading. The image quality of MFC-2160 capacitive fingerprint sensor can be adjusted by setting gain, offset and reference voltage parameters internally. In addition, the internal operations and interface speed can also be configured to meet various finger conditions.

MFC-2160 capacitive fingerprint sensor also has a finger detection function and windowing function for different applications.

Fingerprint Recognition Algorithm Support

  • Good adaptability to dry, wet, or fuzzy finger
  • Repair the fractured fingerprints automatically
  • Great anti-deformation ability
  • Supporting 360 °Authentication
  • Self-learning during usage
  • ISO Standard: ANSI/INCIT 378 Compliant Extractor & Matcher
  • Compliant ISO/IEC 19794-2 fingerprint minutia standards.
  • Fingerprint Template Size < 1KB
  • Verification speed < 700 ms

Comparison

MFC-2160 MFC-1160 MFC-1160R
Sensor 160*160 Pixel 160*160 Pixel 160*160 Pixel
Cost/Performance High-end Medium Low cost
Algorithm +MCU +MCU +MCU
Function parts parts parts
Application windows laptop, tablet, locker windows laptop, tablet, locker windows laptop, tablet, locker

Applications

Ordering Information
MFC-2160 160*160 pixel capacitive fingerprint sensor with IP67

All product specifications are subject to change without prior notice.